thanks everyone for the help, i cleaned the master cylinder and that little pin hole, seems to still be locking up only if i jam on the brakes...
so the brake fluid could make this happen? i think the plunger and the master cylinder looks fine, im gonna try to take some of this stuff apart...
yeah im with u on that, is there any way to test the master? if i remove the top of the master when the brakes r locked if the pressure releases i...
VFR INTERCEPTOR 750 front brakes locking up again Hey guys i took the bike out today after fixing all these eltrical problems, (vfr 750...
i feel ya, thanks again for your help, and im sure sometime soon i will be rebuilding that starter, where do i get the kit, do u have a link?
So today i recieved a used wiring harness in the mail, changed it out quickly before work, and it seems to have solved the problem, let it run for...
hey i had something like that happen to me, i would check all fuses, and then test come of your key components, cdi boxes, voltage reg, look for...
thanks for the help No im not Deaf, i will try either rebuilding the starter if i can find a kit (do u have a link), or ill just buy a brand new...
Hey guys im still trying to narrow down this problem, i just purchased another wiring harness of ebay, i hope that fixes the probelm, but i still...
hey thanks again what r the pulse generators and where r they located? i would agree with u on the carb issue, but why when i go to start it when...
i would agree with u on the carb issue, but why when i go to start it when hot, does the starter seem like its not turning hard, as soon as i...
Separate names with a comma.