Just a quick postscript, replaced the pulse generators and the bike started up but was still not running on the front right cylinder. Pulled...
That is what I have concluded also. I checked the Pulse Generators this morning via resistance check, and found the unit supplying the front...
By swapping, I mean that I swapped the two ignition boxes and two coils already on the bike from the rear to the front cylinders and vice versa,...
Hi, Looking for some help troubleshooting my 84 VF500 that I thought I had recovered after a fire last year. Had the bike running fairly well...
Retested today with the ECU plugs still switched. seemed like all exhaust pipes were getting warm, but the bike was still stuttering, backfiring...
Jury rigged the new R/R this afternoon. Checked battery voltage off the bike and found reading of 13.1 volts, so looks like it was overcharged...
Will do. Will follow up after those two components are sorted.
With help from this forum, I got my fire-damaged VF500f back on the road, and the bike was running very well. Only known issue was that it was...
Yup, I have gotten really good at it!
Just a short follow up to close this issue out on my bike. I tried the gravity feed approach while using much of the stock fuel line layout (line...
Problem solved, and of my own doing! I mentioned that I had replaced the Idle Adjustment Screw as the plastic knob of the original screw melted...
Rechecked them during the second carb clean. Didn’t get the slow jets well enough the first time. Only minor adjustments needed on the floats.
Separate names with a comma.
