Pete, I'd assume that you mean you drilled out the oil hole that is in the gasket that allows oil to pass from the engine to the tensioner, and...
https://www.ronayers.com/oemparts/a/hon/5053f5b1f870021c54be7bb7/cam-chain-tensioner Both tensioners are the same. You need parts 6, 7, 17 on...
http://bringatrailer.com/listing/1972-honda-n600/ Pretty damn slick.
When I had my stator burn up, I cut the leads on the new stator, added a VFRness, and also used the stator hardwire kit. I crimped and soldered...
I thought the flange bolts were the ones that attached Cam Chain Guide A. Apparently they both are flange bolts. Guess I'll have to take them...
I'm in the process of adjusting my valve and am putting things back together. I've reinstalled the front camshafts and their holders and torqued...
I agree with Knight. If it was working before it should be working now unless you disturbed something in the process. Considering all the lines...
You shouldn't have to pull on it to adjust it. The collar that is there is meant to hold it in place so you don't adjust that one. It is...
You may be referencing the cylinders incorrectly relating to the number that is assigned to it. Cylinder 4 is the one that is not adjustable. All...
Does that mean I'm going to end up like Randy?
I'm going to start working on it tonight and will get some pictures with before/after plus install. I found them while searching for the right...
I just found a brand new set of Oggy Knobbs frame sliders for my 6th gen new in the box in my garage. At the time I bought them they were about...
Separate names with a comma.
