Thanks very much stoshmonster for your help. I sprayed down both switches with contact cleaner and worked them back and forth a few times and the...
Thanks again for all your help and the pictures. I'll let you know how I make out once I clean up the switches.
Okay power on both sides of red connector with ignition on with white/ black wire. No power on yellow/ red wire with switch engaged. Any way to...
I'm bringing my lap-top out to the shop with me
I appreciate all the pics and help. Let me follow thru on the above and get back to you.
Fuses where all checked first then when thru other wiring test's. I'm sure the key was not even in the ignition at the time. I'll remove the...
But will by-passing the switch cause any further problems? rather then take the whole switch appart. It seems unusuall that the switch would go...
Tried the test light on the yellow red wire and get no response with the key in the on position and activating the switch.
Thanks Stoshmonster I'll give this a try. Do you think the arc between the positive and the frame would have caused a problem with the swith?...
Folks, Just put the battery in the bike and in the process of tighting the positive touched the frame and had an arc. The fuses all are fine...
Separate names with a comma.
