VFR Headshake I posted here a while back about the same issue with my 02. I got a lot of help and also some dumb ass replies. I've tried re...
ABS inop Thanks for the response. I already have Bluegauges saved in my favorites and had thought about that. They change all your LED's so I...
My bike was crashed prior to my buying it. It had been repaired and I was unable to tell until later when I pulled the front fairing I can see...
Do you happen to know what the rate is on the stock springs?
That's what I thought, but I've turned them all the way in and I don't really seem to notice much, if any, difference in front end stiffness..
Does anyone know what the large slotted screw head in the middle of the fork cap is for? I don't see anywhere in the shop manual where it tells...
Thought I found the problem. The forks were not set deep enough into the triple clamps, about 34mm instead of the called for 41mm. Corrected this...
I changed tires shortly after buying the bike. I didn't notice it on the initial test ride but became aware of it the next week or so. I figured...
Sage advice I think. Sometimes it doesn't seem to matter how clearly you attempt to articulate yourself, something seems to get lost in the...
Okay, so according to the article posted by Creaky, if the shake occurs at speeds below 40MPH look to the front end and if it occurs at speeds...
30K miles. Had the bearings out last night and they seemed fine, cleaned and lubed them then reassembled. Set up torque properly. Feels smooth....
Headshake Thanks. This is a very helpful suggestion. I've been wondering about this one. I'll check them and reset them to the stock settings...
Headshake As I said, I already re-torqued the bearings to spec. Thanks anyway.
Separate names with a comma.
