You'll have fun with an SV. After I retired from Superbikes I got the itch again and the SV was a blast! Lots you can do to them to make them...
The double line might be a touch easier to bleed, as the T in a 3 line set up can trap air bubbles. I've run both types, depending on what my...
Why would anyone powdercoat a Ti exhaust RED? :puke:
$30 for a .25 pice of plastic that took less than 15min to make. And don't be too surprised at the finish quality. Hopefully it's improved in the...
You can make one like the BRG version out of some PVC tubing. I made quite a few of them for our racebikes and then Casey came out with the same...
They don't "need" to be, but for best power, or to set where the power comes in, they should be. You can get a degree wheel at most automotive...
They aren't really very hard to install, unless you want to degree them. Did you get the hardened rockers as well?
Nice score. Looks like it's in pretty good shape for that price! Hopefully it doesn't need much to get it in riding condition.
Just checking to see if you got your shock issues taken care of. I just got my R swingarm and shock and the shock looks pretty good. It even has...
+1 on the 10wt oil. Use the PVC as it won't scratch the fork tubes. It doesn't need to be an exact fit, use the old seals and pound away. Do check...
Forks (but I don't think the triples), swingarm, wheels, brakes (rear rotor and caliper are model specific, but can be swapped as sets) possibly...
There were a set of 1000R forks on ebay a few days ago and I just won a swingarm with a stock shock that I won't be needing. I'll see what shape...
You need to seal them up so the fork fluid and air (which is used as a spring too) can't find it's way out. I didn't go to the trouble of welding...
On the front, you can check to see how far you can lower it by raising the front wheel off the ground and then removing the fork springs. Then you...
Yes, if you run pods you will need to rejet. With the stock exhaust you'll need to go up at least 2 sizes. With a full exhaust it's anyones guess,...
Separate names with a comma.
