I've used one of these (Config 1) on a stock bike before (FJ1200) with excellent results in curing the off-idle lean bog/surge. If you don't get...
Yes, I did it to cover the radiator hoses etc (didn't do as well as I hoped at this though) but part of the reason I left it taller was to connect...
A pic would help. If they are like these ones (first attachment) there is no possibility of floating them - or better point being if they are...
I did the equivalent of this on my 3G by flipping the eccentric on the rear (not an option on the later models) which had the added benefit of not...
All Balls Hmm, the AllBalls wheel bearing kit I got was all chinese $#!+ :crazy: but I was lucky enough to find a local parts guy (Gary Mansi...
See if you can get the whole bike, you won't look back. If you want to use a different Honda shock I know Jamie Daugherty adapts the 929 shock...
springs without removing forks Yes you can. Either support under the bike with a jack, lift the handlebars with ratchet straps to a hook in...
BTW I also have recently ridden Dunlop Qualifiers (OEM ones) on a friend's new Street Triple R and have only good things to say so far. I was...
+1 on the Conti Road Attacks, and +1 on the Avon Azaro/Storm. Having ridden both in Canadian Wet Coast weather from cold and rainy to...
I think John nailed it. <snip> Do you think the complexity doesn't warrant the increase in list price mixed with the potential higher servicing...
Body work is highly overrated. Starters too. Think how light it could be! Too bad I can't post images here but I build a streetfighter out of...
I'm going to take a flyer that maybe the clutch basket is showing some wear, and might be telegraphing the noise through the clutch pushrod to the...
I don't know how you guys even got the cowl on over a Corbin. Mine (1993) wasn't even close to fitting and would have broken for sure had I tried.
It's an aerodynamic thing, not so much suspension. Had similar issues with my FJ1200, where the side bags were fine, the top box with passenger...
This is a great opportunity to run heavier gauge wire (use an inline fuse or if you have a spare slot on the fuse block that will work) back to...
Separate names with a comma.
