that makes sense too, it just seemed close to a press-fit condition so I wondered how much gap there should be to allow fuel to flow in the...
Only able to utilize 1/3 of the intake. Thats why I ran out of gas sooner than expected.
Even more info (sorry to spam the thread): I was looking at another 85 tank and noticed a difference. So I grabbed the needle nose pliers and...
Thinking more about the intake “filter”. Perhaps the thought of the previous owner was to get the inlet above the gunk. Still strange that that I...
No worries. Seems that people swapped tanks freely as I have another 85 that came with an 86 tank.
it looks pretty clean in there. I was able to scrape away a little dust, but nothing like what I saw in the trap. If I put it in On and Reserve...
That number does not match any of the options when you run a parts search....
This has the secondary filter and I don’t see anything in it. I haven’t drained it fully, but it appears clear. I pumped all the gas out (as best...
Luckily I have a second set of carbs that were recently rebuilt that I haven’t installed yet
Appreciate that. I’ll give your suggestion a whirl and report back (probably after I get back from a business trip)
I don’t see a gasket for this spot.
I went to start the old gal after she sat for the winter and no fuel was flowing. After testing a few things, I put a gentle air blast up into the...
Good to know, thank you. I haven’t given them a hard scrub because the rubber seemed a little worn around the outer diameter. My assumption is...
So I decided to not sell and now I'm starting a complete teardown and rebuild on my '85. Frame is off for a blast and paint. Carbs are off for...
Separate names with a comma.
