Welcome to VFRworld.com! Log in or Sign up to interact with the community.

Wiring harness fried

Discussion in '6th Generation 2002-2013' started by PUSkunk, Dec 19, 2007.

  1. PUSkunk

    PUSkunk New Member

    Joined:
    Oct 2, 2007
    Messages:
    79
    Likes Received:
    0
    Location:
    Mauldin, SC
    My family came up to visit me the other day and I was going to show off my motorcycle for them. I took it out, and it wouldn't start, it was turning over and getting plenty of gas. I took it to my local Honda dealership. I called today, and apparently the part the was under recall went, and fried the entire wiring harness with it. They've taken pictures and sent them to American Honda, hopefully it will be fully covered. My bike is my commuter, and the Cadillac doesn't nearly as good gas mileage.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. derstuka

    derstuka Lord of the Wankers Staff Member

    Joined:
    Jan 25, 2007
    Messages:
    6,733
    Likes Received:
    193
    Location:
    San Diego, CA
    That stinks dude. I hope that they will not be little bastards and try and have you pick up some of the tab. Good luck.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. malcster

    malcster New Member

    Joined:
    Jul 13, 2006
    Messages:
    268
    Likes Received:
    0
    Location:
    Bishop,CA USA
    just had my wiring harness replaced last week.Got my recall notice,went to my dealer,they ordered the part and took care of everything N/C.I guess the prob was the ground{green}wire /blue plug was the the issue.I was surprised that honda replaced the entire harness.They reimburse the dealer for 1.5hrs but it takes about 4hrs labor.I feel honda did good!
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3

Share This Page