Swing arm removal

Discussion in 'Mechanics Garage' started by cjames, Feb 10, 2011.

  1. cjames

    cjames New Member

    Joined:
    Mar 10, 2010
    Messages:
    43
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    vancouver canada
    Map
    I would like to pull the swing arm for polishing along with the rest of the aluminium stuff on the bike. Wondering how long it takes and if the special lOck nut tool shown in the book is needed along with any other sPecial tools that may be needed.


    Thanks
     
    cjames, Feb 10, 2011


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. pap11y

    pap11y New Member

    Joined:
    Aug 22, 2010
    Messages:
    367
    Likes Received:
    1
    Trophy Points:
    0
    Location:
    Sydney
    Map
    I had to buy a 46mm socket to get the rear disassembled. Otherwise it was ok.

    I don't know about the front of the swingarm.

    Let me know how you go as I am considering getting mine sprayed when I get my wheels done...
     
    Last edited: Feb 10, 2011
    pap11y, Feb 10, 2011


    This site may contain affiliate links for which VFRworld may be compensated
    #2

Share This Page