Need help with superbike bars on 4th gen - must clear stock upper fairing

Discussion in 'Mechanics Garage' started by Yamarocket630, Sep 9, 2011.

  1. Yamarocket630

    Yamarocket630 New Member

    Joined:
    Apr 28, 2011
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    0
    I want superbike bars, but they must clear the stock fairing uppers or at least only *touch* at full lock. I WILL NOT trim the bodywork. Can anyone who has done this mod recommend any specific riser / bend / mount sizes that work? I'm not looking for ape hangers, just about 1-2 inches up and back with a bit straighter bend.
     
    Yamarocket630, Sep 9, 2011


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. Bubba Zanetti

    Bubba Zanetti Member

    Country:
    United States
    Joined:
    Jan 27, 2007
    Messages:
    3,383
    Likes Received:
    3
    Trophy Points:
    53
    Location:
    Delaware
    Map
    Not that I know of; I had Vortex clip ons on the 97 VFR I once owned as it bacame my street/ track bike. I had them adjusted best I could and I still could not turn the handlebars without hitting the plastic. I didnt care bacasue I was on the track more than the street and I could still make slow tight turns, but it was harder to do it.

    Good luck on your search.

    BZ
     
    Bubba Zanetti, Sep 9, 2011


    This site may contain affiliate links for which VFRworld may be compensated
    #2

Share This Page