I used the RAM mount idea found here: www.sport-touring.net/mods/gps_mount/index.shtml The base is RAM part number RAM-B-231LU and RAM's Rider-specific cradle mount is RAM-HOL-TO2U. I initially tried RAM's 3" stem; it positioned the Rider pretty much like the GPS V in the pictures. I had to glance down a little to read the screen, so I switched to RAM's 5.25" stem. Now the Rider is positioned at the bottom of the tach; better in my opinion. By the way, many thanks to the Wiz for his May 8, 2006, post concerning placement of washers: http://www.bikersoracle.com/vfr/for...76&postcount=20 IP:81.157.227.157 He's right!