84 vf 1000 cali jets

Hey guys, I think I remember seeing somewhere that honda made a main jet size change mid year in 84, from 110 and 112, up to 112 and 115. Does anyone know this to be true, and/or have knowledge of where this info is? I just had mine apart a few days ago and have 112 and 115 in them, cant even remember which ones in front or rear. Any help would be great! Thanks.

 

The Honda shop manual for the '84 1000F I have says "Front: #150, Rear: #145 [Switzerland: Front: #138, Rear: #135]"

Besides the different jets it also says "The #1 & #3 carbs use shorter springs than the #2 & #4 carbs. Do not interchange these parts."

I can upload the manual if you have a site but it is a 94MB pdf.

Here it is: http://www.vfrdiscussion.com/forum/index.php/files/file/184-vf1000f-honda-shop-manual/

 

Yes, i have the manual, but I'm sure I've seen where the cali jetting was changed midyear, just have to figure out where I saw it at. Thanks for the response though. I've been wondering if there is anyone here lately that can respond to any 1000f questions as I haven't had much luck lately.

 

I have a set of Cali 1000F carbs sitting on a shelf but I'm not going to take them apart to check.

Go to Powersportspro.com, or any other OEM online retailer and look it up and let us know. You learn more by teaching.

OEM Parts

 

Thanks capn, that is the info I was having trouble locating again. Anyways... after making some calls to honda today, Ifind out I have a 49 state bike and cali carbs. Is there a way to make this work or am I screwed by having to find a set of carbs. Any suggestions?
These are the reasons I never considered buying a disassembled bike before, but here I am now in this mess.
I know... I asked for it.