2004 Red VFR, plenty of pics!

Discussion in 'Introductions' started by Noobtastic14, May 17, 2011.

  1. Noobtastic14

    Noobtastic14 New Member

    Joined:
    Mar 19, 2011
    Messages:
    159
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Hampton Roads Va.
    New Owner/Member!2004 Red VFR, plenty of pics!

    The last two weeks have been pretty rough on me. This is my first bike and I love the damn thing but have problems going really slow LOL Two weeks ago, It dropped right side and a few days ago it dropped left side!! The right side drop was not bad, the saddlebags were on and it was a very minor scuff. Left side drop ended up damaging the front fairing, side fairing, clutch lever, left mirror, and Helmet :(

    I did a bunch of touch up work finishing with a wax hoping it would blend some of the imperfections into the background but alas It just made the imperfections look like infected scabs hanging off my otherwise beautiful VFR.

    Check it out-
    [​IMG]
    ^^^^(Looks like I forgot a little patch of wax! haha I should have waited for better lighting)
    [​IMG]
    This shot from the back of the bike shows my two extra LED strips that are used as brake lights. This only took a trip to Autozone and under $15 and really add to the bike's visibility at dusk/night. (located on the backside of the passenger peg brackets)
    [​IMG]
    [​IMG]
    [​IMG]

    -Drew
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. Noobtastic14

    Noobtastic14 New Member

    Joined:
    Mar 19, 2011
    Messages:
    159
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Hampton Roads Va.
    Just for shits- this is my first thread on here I'll throw up some extras.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. CharlesW

    CharlesW New Member

    Joined:
    Feb 20, 2011
    Messages:
    204
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ankeny, Iowa
    Mirror!!!
    I think I have mentioned this before, but a good welder may be able to repair your mirror if you broke the stalk and still have the pieces.
    They seem to break the stalk where it flattens out to go in the mount.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3
  4. Noobtastic14

    Noobtastic14 New Member

    Joined:
    Mar 19, 2011
    Messages:
    159
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Hampton Roads Va.
    I have a new set on the way with LEDs- they may be just a bunch of crap or not who knows but worst case I'll take the mirror over to metalstech and get them to tap it with the tig
    Thanks for the suggestion! I didn't think of that.
    -Drew
     


    This site may contain affiliate links for which VFRworld may be compensated
    #4

Share This Page