Accessories for Sale 1996 frame, engine, and carburetors

All items are in Lubbock, TX. I only accept checks or paypal friends and family payments.



Frame is straight and clean but does not have a title. I will provide a Vermont accepted bill of sale. $100+shipping



I do not know the last time the motor ran. It turns over cleanly without any noise, has lots of compression. I'm confident it'll be a decent motor but I have never heard it run. Does not have any external damage and does not look abused. Bike was parked because a previous owner wrecked it and never got back on. All of the electronics shown have been removed and sold already. $125+shipping



Carburetors need a good cleaning, but they're not gunked up. Bowls everything were pretty clean but they were left open in a dusty environment. The slides move freely but you can feel the grit. The butterflies move smoothly. I do have the whole assembly soaked in penetrating oil. I've taken the caps off and the diaphragms all look to be in good shape but one of the caps has a suspicious crack in it that might warrant replacing...or a dab of JB Weld. Two of the velocity stacks are in good shape, two of them are pretty buggered up. There are no pilot, needle, or air jets...the plan was to rebuild them to stock but I'm getting there. If I got the jet sizes you need I can put them in for $5/ea, or cost at the dealership if I don't, but odds are you're going to want your own sizes. $115 shipped to the continental US.



I recommend using Fastenal for shipping the frame or motor and I can pallet and deliver them to a local store...it's usually $75~100 for these kinds of things. $250 + shipping if you buy the lot.

 

Do you ever happen to get down towards Austin? I would buy the engine, but don't want to go through the shipping hassle.

 

What is your plan for the front end that in the picture?

 

I am SO sorry for the late reply, this forum din't notify me that anyone had responded!

I do on occasion though infrequently and I don't know when I'll be down there again. I'll be in Abilene on Thursday haha

I will deal with shipping at buyer's expense...going to Austin via Fastenal would probably be like $80.

Sorry but the front end is not for sale, just the engine and frame.

Carburetors are sold.

 

Well, if you don't sell the engine to anyone else AND you happen to be driving south on IH35, let me know and I'll buy it.
I live just 2 miles west of IH35 at Ronald Reagan in Jarrell.
No rush. My e-mail does seem to be working with the notifications, so we'll test yours again with this reply.

 

nope still didn't get it, oh well, I'll just make it a point to check this forum each morning until this stuff is gone

or I can be emailed at makenzie71@gmail.com