1990 primary drive gear brain cloud

Discussion in 'Mechanics Garage' started by flummerylove, Mar 8, 2012.

  1. flummerylove

    flummerylove New Member

    Joined:
    Mar 9, 2010
    Messages:
    80
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Utah
    Greetings. The thin outer that is circliped to the drive gear should be under spring tension when indexed with the clutch basket gears, correct? If so: while fixing my starter clutch today (again) I noticed the drive gear was missing a spring. I had not properly meshed the thin outer with the clutch basket gears and one spring just rattled loose. DOINK. Do I assume correct?
     
    flummerylove, Mar 8, 2012


    This site may contain affiliate links for which VFRworld may be compensated
    #1

Share This Page