Well, it sounds like you're perfectly aware that you could drag a knee if you want, so it seems like this whole thread is rhetorical. I don't...
Oh, and by the way, of course I watch MotoGP, the AMA and all that. If your riding position is good and you're that fast, then dragging a knee is...
Sorry MD. Didn't mean to get your panties in a bunch. I'm as hard on the twisties as the next guy. I've ridden the Hocking hills and the Triple...
If you're dragging a knee on the street, you're riding beyond your ability to do so safely. What about dirt, cows, birds, fuel ect... Not safe....
Bump. So did the bike originally have preload spacers under the fork caps? Did each individual cap have it's own schrader valve? I can make...
It's been a little while, but I took the float bowls off, checked all the floats, checked all the float valves and seats and found nothing. It...
Thanks Guys. I guess I could have been more specific too. the bike has some fancy Lockhart Phillips gauge on top of one of the fork tubes and a...
Bump! I know you guys are looking.
Has anyone ever sealed the front forks on an 85 VFR500, or any of it's vintage? Most manufacturers no longer use air assisted preload because it...
Well the carbs are apart now, so I'll work on them later this week and let you guys know how things turned out.
I guess we did. So those tubes I'm talking about that aren't the fuel supply tubes are bowl vent tubes?
I guess reading over the replies again I understand the carb/cylinder # confusion. Even though the motor is a V4, the carbs are lined up in a...
Sorry, I thought it was pretty clear. When you remove the carbs, the fuel feed line from the pump attaches to what I'll call the left most carb,...
Any ideas what could cause fuel to pour out of one of the diaphragm air inlet hoses? Cranking the engine over trying to start it fuel begins to...
Separate names with a comma.
