Yep, it came fine. Thanks.
Figured as much. They did look too small for it but I've never seen them in person, so..
Do the Corbin beetle bags (5th gn) fit a full face helmet inside, or are they not big enough... I occationally take a passenger for a ride and it...
+1 for this. If you have the centerstand (lucky!) checking the rear brake is pretty easy. the front brake is a bit harder though... I went on a...
So I went to get an oil filter from the local dealer. The official filter for the 2000 model is TINY! 50mm diameter? That's got repeat sales...
And ... *drumroll* it's back together and working fine (knock, knock.) I even carefully followed the manual's torquing specifications. After I...
If there's some interest, I can try to clean up some sound clips I have of my 86 with a ... uh .. GSXR600 exhaust can :rolleyes: (hey, it came...
Every "click" of the fuel pump is a single cycle of the diaphragm pump working; i.e., that's normal. A single pulse of the pump will push however...
And here's pictures. I'm going to try and repair it, not by gluing the crack back together but by jamming some epoxy in the space between the...
Oops... So, guess what I just discovered. I didn't tighten down the three bolts enough, so they all worked themselves free while it was running,...
:-) Yep, noticed that almost too late. I also replaced the needle bearing in it, just in case. (also, replacing the crankcase gasket was annoying,...
Yep, it's fixed now. After months of ignoring and working around the issue.
I realize that I'm digging this up from the grave, but I wanted to bring some closure to this issue. There were two distinct issues: unaligned...
I've attached pictures of the important part of the clutch (from an 86 VFR700F). The flat/cylindrical part with the T1F etc. writing and marks...
I have an 86 VFR700F as well with a shot starter clutch (one of the rollers destroyed itself) ... if someone would be willing to part with one,...
Alright, after this post I'm going to stop talking until I can run it tomorrow :biggrin: I looked again, and I realized that what I was...
Sorry, I changed my post so it's not that evident... I looked closer because it seemed like that should be impossible (missing screw?) and now I...
Uh, OK, I just went and looked and made the most bizzare discovery yet... there is *NO* pilot screw in that carb (LF)... or maybe not? There's a...
See http://vfrworld.com/forums/first-second-generation-1983-1989/11789-bizzare-starting-issue-86-700f.html ... however, JamieDaugherty is making...
Well, I've got the 4 dial gauge meter, I'm not sure how accurate it is (I can take it in to work and hook a vacuum pump up to it to check) I...
Separate names with a comma.