All fixed! hurray :-) Yes, it was the needle bearing and bush that were at fault! just picked on up from a breakers (a full clutch assy) from a fl...
If the notches on the basket are not too deep (or on the tangs on the friction plates), they can be smoothed off with a fine file, although this...
Right then, ive removed the r/h casing, and i found that one of the 5 clutch spring and bolts has come loose, and scraping against the casing!, so...
RVFR - read post 4 Lgn001 thankyou, that will now be my next step, as it seems the most logical way of finding the fault without splitting the...
Right, i removed the sprocket cover (which unfortunately carries the clutch slave cylinder, so disengaging the clutch is impossible while turning...
Cheers for that mate! i will take the bike out again and clarify, but im quite sure in neutral never makes the noise (clutch in/out), only when in...
also i change the oil every 1000 miles and filter (gen honda) every 2000 miles, and level is fine? i do have a slight weep coming from gear...
Elf800, try reading slower???? :rolleyes: LGN001 Sorry, yes with the clutch IN on side stand in gear (typo sorry) i will check the splines...
:frown: I hope someone can shed some light on this problem, take some of the stress away my vfr750 fj when cruising/accelerating/decelerating,...
I hope someone can shed some light on this problem, take some of the stress away my vfr750 fj when cruising/accelerating/decelerating, makes a...
Does anyone know where i can get a replacement L/H middle fairing panel for a FJ/FK model? any help would be greatly appreciated as i had an "off"...
yep, thats looking like the only alternative. As soon as i have some spare cash, i will pull apart the clutch and inspect everything ( i didnt...
right, just removed the pushrod, looks fine (a little corrosion, but nothing major) cleaned up. reassembled, same noise???
Will do, as soon as this F*****G weather clears up!:frusty: :frusty: week after week of torrential rain...... Sod it, gonna give my mate a ring...
thanks for the reply, much appreciated :), but i would of thought that the pushrod would only be noticable when feeding the clutch in or out, as...
P.S. The clutch operation is A1, smooth takeup, no dragging/snatching/rattling. I did bleed the clutch yesterday as the fluid was bad and full of...
Hi all, i have a vfr750 fj and need help identifing a noise. It only does it when the clutch is out, or accelerating, for example, sat at traffic...
Separate names with a comma.
