Most likley the rear shock link bearings or the swing arm bearings. They should not creek with such low miles. The bike may have been underwater a...
It may not be the clutch, pull and check the clutch push rod under the cylinder. They tend to get a bit of grit and rust on them and hang up a...
The vf 500 cans are hard to get slip ons for since they cone out from the collector and change angles. The bigger bikes have a more consistant...
The hardest part of VFR carb work is removing them. Since the bike is a V 4 it takes some gentle prying to pop the rack out. once you get to it...
yeah, fix that exhaust leak. Check your throttle cables as well, sounds like a fryed cable possibly hanging the linkage. A vacume (carb sync) test...
Do you know the last time the carbs were synced? Yeah, bike temp, air temp and density as well as fuel octain on carbed bikes all cause idle...
My bike sat for about a year and had the same thing. You can try rocking it, but I had to just hunker down on the brakes and drop it into gear to...
It takes some knowhow to know what you can do with tire sizes, but the numbers break down more or less like this. 120= the tire with in mm I...
Chris, the Laser looks like a great setup, Ill give coments on it compared to the Yosh when I get mine bolted on. Painted my bike blue. Im going...
Nice bike, thats the same setup I had on mine. Keep an eye on the mid pipe, moisture tends to collect there and rot it out from the inside. I...
I have played with the profiles, I like the current combo I have, I ll have to get the numbers for you, high profile in the front, lower in the...
Plus the header pipes are very well made Titanium parts. The headers have long outlived the yosh mid pipe my bike had and the heavy stock cans....
Here is the CBR light roughed in. Not much different than stock but a bit, it was cheap. Still need to rivit some mounts and get some trim around it.
So where can I get the laser?
Just picked up a new CBR 600 F2 fixture on ebay. the guy has more. Dirt cheap for $35 shipped. Looks like it should graft into the VFR well. Not...
I have run the Battle Ax's as well and liked them. The cupping comes from heavy breaking. If you ride it that hard I would spend the $ for...
Give your Yoush to me and Ill give you my custom scuffed stock pipes :biggrin: . I'm gonna serch for that laser pipe unless anyone has come up...
Hey, Im in a bit of a jam. My bike got hit and the lowers were blasted into a million parts. I got glass bodywork form Cobalt but I dont have the...
I put progressive springs on my VFR 750 but I also did Race tec gold valves at the same time so I have no head to head but I can tell you the...
Depends on your final gearing. I use lower (than stock) gearing on my bike for a bit more grunt and to save the clutch in traffic. The 750's had...
Separate names with a comma.
