I drove 20k miles with no issue. just randomly one day she made one turn and clunk.! so i’ve reassembled the engine making sure the pin was in...
Here’s some more pics of the pin and marked the edge were it meets the case. Also just for my own satisfaction I took a pic of the pin in the...
I replaced the starter clutch about 2 years ago (20,000miles) because it was cracked and gave me intermittent starting issues. I’ve had zero...
I did not realize the pin was supported from the covers side as well. That makes me believe this thing is salvageable.
I will do that today, and reply with my results.
The starter has been very quiet, no grinding or cracks in the starter clutch, i replaced it about 2 years ago. The mark you see at 11o’clock...
’94 vfr went to start her up the other morning and git 1 turn over then a horrible CLUNK sound. And she would turn no more. Pulled the clutch...
Has anyone had the experience of riding from seal level up to higher elevations ? I’m talking 6…. 7…. 8,000’ elevation. I’m sure at that...
Yes, key #’s are they key … to avoiding all this or…. Make spares ? Here’s a cool gas cap I saw on eBay. Any thoughts ?...
Yes, Captain 80’s. After looking at the schematic I found the red & red / black = go ! Thank you . And now I’m down to 1/4tank of gas… my...
Well, It has happened… I lost my Ignition.(and gas cap ) keys. Now I’m kicking myself for not making a spare. And I’m scouring eBay for a...
Good afternoon gentlemen I have a rear seat cowl for my '94 that has broken tabs on the back, it primarily stays on only the back of it lifts a...
well I finally figured it out. and The Captain was very close with his prognosis. it was the clutch rod that had extended when I replaced the disc...
Well I did not measure the thickness of the new discs. But I suppose that’s an idea… Unfortunately after swapping out the discs for the new EBC...
So over the weekend I took her apart again, s l o w l y paying close attention to how it was assembled…everything came apart as and went together...
Yes, the Rotella t4 is for diesel engines. But is also good for Motorsports w/wet clutches and cost half of typical Motul oils. I’m at work on it...
Yes, I had them soaking for about 4 hours . Assembled correctly , I will double check this evening … Sent from my iPhone using Tapatalk
Hello fellow VFR’s . I recently replaced the clutch discs and springs on my 94VFR. This is only my 2nd clutch job so I may have missed something...
No, I guess I’m not aware of what your eluding to?? Sent from my iPhone using Tapatalk
Doesn’t sound like these rubberized sprockets don’t do much Other than convince riders spend more $$ Sent from my iPhone using Tapatalk
Separate names with a comma.
