Are you sure the pump is delivering enough pressure to open the pressure regulator. You could hook an air line up instead of the fuel line and...
The spring and ball can still be purchased from Honda. I'm not sure if there was a plate or not. There definitely is on the 5th Gen. I'll take...
StrayCat, being a responsible individual I feel I need to point out the fine print on the track day entry form (generally found printed in white...
If Capt 80s doesn't take you up on the seat, I might. I have a stock seat in good condition to trade. Looks like a great find.
In regards to the fan. did you wait long enough to verify the switch is bad? It does not kick in until about 102 C (215 F) and I've seen it...
If I remember correctly a lot of these sensors have a common power supply coming from the computer. If there is a problem with a bunch of...
Yes please do. I'm starting to think about exhausts for my 86 stock VFR (to be refurbished this winter) and my project 86 VFR (the following...
Its worth the effort to have made sure you found the bolt. 1) It could have come back to bite you if it had gone down the wrong hole. 2) Peace...
I adjusted my starter valves last weekend and I noticed cylinder 1 had alot of variation in vacuum level but #2, 3 and 4 were fairly steady. The...
No I got sidetracked with other things. I will be bringing everything into the workshop before the holidays. Joe at V4dreams seems to have had...
Hi AJB, I'm in Kingston. When the snow flies I'm rebuilding my old 86 VFR streetbike that has been sitting for a number of years. Then next on the...
Yes constant Rpm. Blade pitch changes for fan pressure / flow. Stall can happen at any speed if angle of attack of the blade exceeds the ability...
We are going to install some instrumentation on another unit and run through start scenarios. We want to see if the fans run in the stall zone at...
We have most of the part required to build this fan up again but lots of conseqential damage. need to identify the chicken and the egg. I'll get...
So we had a 3500 HP boiler axial flow, variable pitch, Forced Draft Fan self destruct a couple of weeks ago. It happened once in the past. thought...
I'll second all the other comments above and add: 1st - the bike looks like it was kept in good condition cosmetically by the previous owner and...
I agree you should check the coolant by removing the rad cap and the expansion tank. At the rate you describe your looking for more than trace...
I'll start searching that. The project bike won't see allot of miles so a slipper clutch and that might be enough. I'd say it would be a track...
I'll see if I can dig them out of their storage spot this weekend. If anyone has any ideas about how to adapt a cush drive, I'm all ears. I've a...
I've called a friend. His friend is an OPP officer from South Porcupine (Timmins). I'll see if he has any thoughts.
Separate names with a comma.
