I got one from a member here. Mods can delete.
PM sent.
Hey Everyone, I'm searching for a fuse cover for my VF500F. PN 38210-MF2-000, fits all years 84-86. I'm located in California and willing to pay...
I'm looking for the fuse box cover that goes on the top bridge, do you still have it?
On my '86 the PO used two 90* elbows. Works great.
The carbs were cleaned out prior to adjusting the valves. They are spotless inside but I need to double check what I have the pilot screws set at...
This bike isn't done yet! My compression tester, as it turns out, is missing an O-ring. I readjusted all the valves and checked compression with a...
I wish I had taken a compression reading before tearing into it. It was running, albeit poorly, before attempting to adjust the valves. I am going...
Sorry it took so long to get back to this. I did a compression test on the front 2 cylinders and only got 30PSI in each cold. I did the test with...
I'm not sure if you are familiar with the California carbs/evap set up on the '86, but let me try to explain what I did to get rid of those parts....
Hey everyone, I've been working on my VF500F but I've run into a bit of a snag. First a little back story, I picked up this machine about 3 months...
It doesn't melt it, it dissolves it - it is a solvent after all. Acetone, more commonly called finger nail polish remover, will do the same to ABS...
Is it really any worse than acetone, toluene or other harsh chemicals?
For anyone else who might be looking for this info in the future the dimensions are as follows ID 34MM OD 46MM Length 22MM.
I guess you failed to read the part where I said that was my plan but that I wanted to have everything ready before I started taking shit apart,...
Uh, yeah, I started there, that's where I found the set of 4 for $100. And also a single OEM for $50........ There is a reason I'm planning to use...
TLDR: Does anyone have a 1986 VF500F carb boot they can measure the ID, OD and length of? Hey guys I need some help. I'm working on a 1986 VF500F...
Sorry for taking so long to get back to this. Between rain and work I hadn't had a chance to even look at the bike. The battery wasn't holding a...
I checked it after install and had a temporary volt meter mounted on the dash for a while and was getting a consistent reading between 14.2 at...
1991 rc36/1 keeps having electrical hiccups. Thought I had this nailed, I thought wrong. Here is a rundown of what happened and what I've done....
Separate names with a comma.