Appreciate the help Cap [emoji481] Sent from my SM-S911U using Tapatalk
Nice! You think the 90-97 VFR should be bolt up and go with double checking the wires? Sent from my SM-S911U using Tapatalk
Ok so 1.xx voltage drop from coil to battery. No bueno And I dislike this shitty start button they have on the 500. Is there a good upgrade to...
Did some voltage checks. 10.8v on the black/white coil wire. 11.5v after disconnecting the coil bracket and reattaching.. ground issue? Kill...
I could get at least some backfire with this solenoid installed. Probably take this downtime to do the carbs in the ultrasonic and replace the...
Wires look ok. One of the power leads on the 4 wire connector got Real hot, it melted the red plastic housing. But the wire at the connector...
There is a slight groove in the end of the collar. Must go there? And looking at Partzilla the flange end is on the wheel side/inside. [emoji106]...
Bushing and collar arrived. Can't figure out the collar bushing orientation though. Is it shoulder outside or shoulder inside? And where does...
Engine not running it will only spit a few times unless it has constant 12v then it will pump continuously into an open container, as the manual...
It should still fire up with a gravity feed tank. Unless the cylinders are not getting fuel. Sent from my SM-S911U using Tapatalk
Oh man I thought shit was breaking on every bump! I went straight back to the driveway and found the caliper bracket just flopping for and back....
Your battery may have just enough juice to turn the engine over, but not have enough left for spark. Sent from my SM-S911U using Tapatalk
Yes 41 bushing Gone. And the sleeve looks like it's been bouncing around in there If it's even the correct piece.. That's all I have. Trac...
Looks like I am missing a few parts. Rubber bushing The metal collar/sleeve I have looks absolutely destroyed compared to the Partzilla pic....
Nice! Thanks for that squirrelman. Glad it's still available [emoji4] Sent from my SM-S911U using Tapatalk
[MEDIA] Because phone app doesn't like me uploading pics, sorry Sent from my SM-S911U using Tapatalk
The sleeve is there. Unless there is a bushing that fits over that sleeve, the eye that that fits in is Way bigger than the sleeve, or the Trac...
Yeah I know. I'll try that first but if it's grey and metallic that comes out, I'm taking the forks off Sent from my SM-S911U using Tapatalk
I feel like it needs to be tucked under. One of the lower mounting legs on my fairing stay is definitely bent upwards slightly. Probably causing...
Well, test drive went ok. I feel like the friction zone is still pretty far out on the lever, but I am able to better modulate it. Must be how...
Separate names with a comma.
