You should get some frame sliders. If you low side like that again you will have zero damage.
The speedometer on the 8th gen is very accurate. It does not use the same speed sensor as the older models. I don't know where the speedometer...
I got a speedometer app for my cell phone and checked again. Speedometer on bike definitely reads 1 mph higher than the GPS speed. By...
Just duc taped a Garmin on my 8th gen with -1 on the front sprocket. At 75 mph GPS indicated on bike is 76 mph. Seems to read +1 mph on bike...
How many miles?
I have a GPR exhaust but different model. Loosen all the clamps on the exhaust and make sure it is pushed down as far as it will go. A little...
I have an 8th gen. Yes the gear indicator works. First gear is more usable. Sixth gear is about I think 6,200 rpm at 70 mph - just about...
Sounds like the position of the shifter. It will work if you go one less on the countershaft.
You can check the clearance on the normal valves without removing the cams. This is pretty easy. If normal valves are okay then I would assume...
The 2015 VFR is a much nicer and faster bike than the 2010 BMW F800 ST. For a sport touring bike at the current prices it is a good deal. No...
Makes sense because the VTEC valves are used a lot less. They should have less wear.
You have to remove the cams just to check clearance - V-tech system.
15 /45 is the same as 16/48. Either of these would give the same performance. If you just want to change the gearing, then I would go one...
You can easily replace the front sprocket with a 15 tooth and use the stock chain. I think you will like the change.
It could be you just need a new battery. Load test your battery and see if it is weak.
I have the GPR. I have both silencers in and I think it is pretty loud. I don't like it too loud. [IMG]
Switch turns traction control off on the 8th gen. I have one and that's how it works.
You are probably putting too much pressure to flair end. You just flair end enough to bottom tool. see YouTube [MEDIA]
Are you sure you are not over-filling it? Do you check the oil warm, on the centerstand, on a level surface?
Looks like they have changed the design of the pucks. I have the same metal parts but the puck looks different.
Separate names with a comma.