Thanks jrod, I was thinking the same thing about the 40s clogging less but I really should just ride it more. Pretty sure this time around it was...
Thinking about going to 40's in my '86 due to not being able to tune out a lean surge. I know the carbs are different in '84 but I am already at 3...
I always had a tough time getting the green stuff off. What I found works pretty well is soaking in PineSol. I use it straight but others have...
I use Partzilla for factory parts. Of course, not everything you need is available.
If you have any appreciation for motorcycles, especially the vintage stuff, it's a must-do. The museum itself is worth the trip. Really first class...
I think because the guy who built it (the racetrack, the facilities, the museum) lives there.
The stock rear turn signals are awful. Mine were drooping too and I also got tired of having to walk around them. Replaced them with some LEDs and...
Its a must if you are anywhere near Leeds, Alabama. I've been going regularly since the 5th show. The museum by itself is worth the trip.
The front cylinders have spark? Are they fed off of the same coil? This happened on my GPz. Two cylinders were not firing and were on the same...
O rings will work fine.
Do you have a center stand? In poorer days, I have done the front and back wheels by putting the bike on the centerstand. I use a piece of plywood...
Dr. Jay, When I checked the compression the carbs were off the bike. I am planning to do a leakdown test this weekend if I have time. Also, I...
Dr. Jay, I used an older Craftsman pressure gauge and I got 90-105 but the engine was cold. I have not tried a leak down test but I probably...
Hey Gang, While I am flushing and cleaning out my rusty tank I thought I would give the carbs a sync. I hooked up the tubes to the ports in the...
I'll be there. Not sure if I am bringing a bike since I'll be with the family. I'ts a great time.
Yeah, I think that is my problem. The rust dust is clogging the pilots and God knows what else. It looks like I am taking the tank in for a treatment.
It is but you should remove the o-ring as well. It's easy to lose teh washer too so you ahve to be careful. Best to do it with the carbs off the...
Update: I pulled the carbs again and cleaned out the pilots. They were plugged up. I put it all back together and it seemed to run much better....
Hi David, Have you compared temps at the header pipes? My H1 had the same problem. One pipe would not heat the same as the other two. I traced it...
Yeah. Do a search. I think I used one from a Geo Tracker.
Separate names with a comma.
