Camo, thanks for the advice, It's getting better and the pedal/lever feels good resistance, i'll likely be bleeding them a second time after a...
Camo, thanks for asking, over the last 2 days I have been bleeding the brake system with pressurizing the pedal/lever and it is getting better,...
Umm, I dont think the pads are good anymore now that they have become contaminated, spring for new pads I would think. Its unfortunate but I...
No not yet, DVD player is on the fritz. Ill see if netflix has it and join back. Also want to see the postman? some guy at work says its good....
Camo, no, not even one you can feel, the dark marks on the bottom outer race are just that, from when I used the harbor freight ball bearing...
I can supply pictures. I have to find my digital camera first. Right now the wheel and forks are off again because I am in the middle of...
Whole shabang needs to come off again anyways, I just learned that the tracking divot in the middle of the steering travel is not a tracking...
Thanks to you guys for advicing.
"One other thing.. Use a block of wood over the top of the whole bearing when tapping it into the hole. Don't let the steel hammer directly...
Update I put everything back together and the front wheel does not spin as freely as I think it should. I lift the front end off the ground...
I will try tightening all the works back together when I get my forks back. thanks for the advice and I'll let you know what happens.
O BTW is your 2002 a 5th gen?
Thanks Thx for the advice, I will do that, and if it doesn't spin freely ill go through with the re replacment, ugh.
bike info I forgot to say what I have. It is a 1998 Honda VFR800fi with 44,000 miles on it, I bought it 2 years ago at 35,000 miles.
I went to replace them cause one was a little off on the inside, you could feel it, so I got them out, seated the new ones in, numbers IN, is that...
Separate names with a comma.
