[IMG] VF1000F2F, in bits
I have a small lockup garage with no power or anything Yours is a palace VF1000F2F, in bits
Now that’s a proper workspace VF1000F2F, in bits
I would not use red, especially Permabond red That stuff requires 550 degrees F to break the lock, I would stick with blue, but not all...
Keep the pictures coming, so much better than the poor images in the manual VF1000F2F, in bits
Believe it or not, cherry dash shine has a lot of plasticisers in it, that stuff soaks in too Did some small dash parts in it as you need to seal...
Anyway it’s all lies, Kev only has 11 kids VF1000F2F, in bits
If it work it works, used it lots on the rubber and plastic bits of the Porsche Can’t imagine that petroleum jelly is much use, and lots suggest...
You can get Gummi here...
Looks like it’s good stuff, can’t buy it in the U.K. It’s sure got a few warnings on the can, been searching the inter web for a solution to...
When I finished repairing the damage to the front forks and damper rods I managed to get in an hour of riding before it got dark and it was 15...
Ok so with some deductions and a re-read of the Manuel, it would appear I am also an idiot The rebound springs are inside the the fork tubes DOH!...
A bit of info here Attempted VF1000F2 resurrection...
Ok so I now have some problems Stripped the F2 and I have no rebound springs in either bike The right hand fork the drain bolt had been stripped...
Nice, plenty to do, get some toothpaste on the headlight and screen to polish those up VF1000F2F, in bits
Welcome VF1000F2F, in bits
Separate names with a comma.
