Cavman, do yourself a favor and chop the stator connector off and solder the wires if it hasn't already been done, has to be part of the welcoming
My guess inside the solonoid will be fine, I'm convinced the problem is in the top fuse section, coil solonoid should be fine
Tat somehow we have to keep this topic top of the page and keep banging on about it to try and get the message across to everybody that this...
Grey, just more proof the connector is the cause of constant grief, it should be one of the first things pointed out to any new member joining as...
You are kidding, is that the new one? if so this is just bullshit. makes a mockery of this VFRNess stuff. Is the VFRNess a Honda so called fix, is...
Tat Most people have given VB the flick, too many chemicals in it that give you a stinking headache even after only having a couple of them. I...
Of course if you pull the 30 amp fuse it wil die it is the main fuse for all electrics, it has nothing to do with the solonoid, they are just...
Tat sorry. I don't know anything about the VFRNess but I assume it is just heavier wires but connecting back to the existing connectors. I hear...
Tat, sorry to hear that, puts such a bad taste in your mouth, takes the glow off owning a VFR
Still doesn't make any sense, should be no power in the solonoid unless you have your finger on the start button. A loose connection from the...
Over charging should not cause a solonoid problem because the only time the solonoid has power running through it is when you actually push the...
Jason, good work but I think a1gatorz has now given up.
Check the battery earth top frame for starters
Well put together
Voltmeter can be fitted to any ignition on wire in the system anywhere, it is just registering voltage in the system, not any flow of current. You...
Problem is they are a push together fitting relying on the tension in the connector to make a perfect connection, not perfect so the connector...
Cut the wires, slip on a piece of heatshrink tube of the right size, solder the wires, slip the heatshrink over the join, heat the heatshrink with...
Well now you have to start probing around with a test light to see where you have power, just the fact that everything is dead still point to the...
Ok so the vfrness is new, was that before or after those spade connectors got all stuck together and needed cutting apart with a razor? if so it...
Main fuse?
Separate names with a comma.
