For starters have you checked your connectors from the stator to the rec/reg, when these go bad all sorts of weird things happen, check what...
Read up on here about carb cleaning, pull the carbs give them a clean and you should be good to go,at worst you might need "O" rings, do not split...
When we have a known problem with connectors on these bikes, solder is the real only option for a fit and forget method, any other fix will...
They got 200mls in each leg and the springs did go in. I'm not sure how mls relates to cc's
I fitted new seals a moth or so ago on my 86 VFR and I put a couple of hundred mm of fork oil in them and all is fine except when I enter or leave...
No problems in the oil pump?
Certainly no big deal if you have the right gear
No idea, complete guess, are you using the stock bike wiring loom, go kart doesn't need all the wires that a bike needs
For starters a propane torch won't get it hot enough and I wouldn't like pulling that hard on it with it still mounted in the frame
Skates, how do you turn them on doesn't look like there is an on/off button? I see they now have 5 settings
The swich/controller is about 40mm square 15mm thick, on/off button and a +button and a - button.
Only problem with that idea is you are keeping the springs fully compressed
Squrriel, many people run these gravity feed, and that is nothing like 1psi, I can twist the dial and I have 3 psi, just wasn't sure what the...
I'm running my 86 VFR at 1psi fuel pressure. I assume this pressure is adequate, I don't want it to run lean, anybody have any ideas if this is...
Guess I could pull it to bits to find out why it works the way it does
Soldering may not be the complete fix but it sure takes one problem area out of the equation. I recently saw one that had been joined with screw...
Skid I don't think the wire load carrying capacity is the problem, if it was then we would see burnt wires, every bit of burning is always the...
You say you rewired the bike so you must know the wire that feeds the tail light from the right hand switch. Have you put a meter on the tail...
As you said keep pushing it till you drop, then try some more and eventually they broke loose, top gear also helps. Now I have just ridden it...
I think what might have unnerved the O/P is he probably started reading the posts about "you dropped it how many times" reading that is enough to...
Separate names with a comma.
