COVER, R. GRIP *R157* (ITALIAN RED)
COVER, L. GRIP *R157* (ITALIAN RED)
Got these randomly with some...
Can't quite tell from the pics... which bars?
I like the individual throttle housing and start switch. I've been converting my fleet over to...
Yeah, there are instructions about adding some to your oil. And I would reserve judgement until you have it fully road worthy and get a good,...
It's barely discernible on the brakes I deal with (newest brakes I have are mid-90s CBR/VFR), but the seals are not symmetrical. A look in the...
The caliper seals are slightly "dished" and need to be installed in the correct orientation. The dishing helps retract the pistons slightly when...
Thanks for the update duccmann. Firing off a fresh round of positive thoughts.
Nothing like a VFR. Very cool.
Positive thoughts going out now.
You really should have given cbx first right of refusal on these through PM.
Hey! Looking good and welcome!
I usually use a piece of mild steel tubing for my anode. If not I carve a notch for the vent.
Looks cool! Glad I could help. Thanks for posting some pics.
I just take some firm foam and carve into a cone shape to fit the filler opening and drill a hole for the anode. Put a bend on the anode a little...
I've done electrolysis on a half dozen tanks now. It is simple and simply amazing. The best thing is it doesn't hurt the finish on the outside....
Valve float at extended high RPMs leads to mushroomed valve stems and then eventually a dropped/sucked valve. Friend did it twice on his 84 500...
On its way.
ASSEMBLIES WHERE 44311-MF2-000 IS USED
1984 VF500F A - FRONT WHEEL
1984 VF500F AC - FRONT WHEEL
1985 VF1000R A - FRONT WHEEL
1985 VF1000R AC -...
So, opposite of speedo or in between bearings?
Separate names with a comma.