Hey! New VFR owner here!

I just picked up my "new" '87 VFR700F2 a couple weeks ago. I got it for cheap, and I'm working on making it road-worthy again!

So far, I've rebuilt the forks seals (I'm thinking some stiffer springs might be in order...or maybe just newer springs:biggrin, and started looking at the other parts I need (grips, levers, left foot peg...or rear sets)

looks to be a fun bike, and the few quick test rides I've had with it have proved that to me.

I'm looking forward to getting this thing running good over the winter, and ready to go for this coming spring!

 

good luck with it ... have fun rebuilding but most likely will have a lot more fun riding it , keep the shyni side upi

 

Welcome.

Keep us on on the progress. Pictures too please!

 

Welcome to the forum,

If you need parts let me know.
I have two 86 VFR700F2's that are parts bikes.
Dan

 

I'll get some pics up when I get either a working camera, or break down and buy one of those disposable ones, I promise, my other forum has been asking too

as for parts that I need:
left foot peg and bracket
choke cable
clutch and brake levers (I'm working with a shop to get these though so I can have new ones)
grips

...that's all I can think of right now...

it's pretty ugly...it's a beat up old bike (hence the price)...it has the rattle can special paint job (and the exhaust cans rattle pretty good too! )

 

I don't take pics very often, but I owe this forum and another some pics of my VFR.... :mfclap:

so....here's the pics!

my pegs:




one's broked...it sucks :x

my bike's busted ass:

it's busted to hell and back...:x

wtf is with this bolt the guy had to hold the clutch lever on with?

missing lever....(I've got one.....)....just need the stock bolt...they must be proud of that bolt too.....$6! SHIT

the bike:





stuff I got since I got my bike:

think I gots enough levers?

see if you can find the part I broked: :tard:

oooops!

wtf are these bolts for? the guy I got them from said "dunno, but when you need them, you'll know!"



Ok, anyone know where to get the pushrod and bushing that the clutch lever uses to actuate the clutch without paying $20 for the fuggin OEM parts?


I know a guy who sold me a choke cable....maybe he's got one or 2...

 

Good Choice there I had an 86 700 and kept it for 11 Years! Good Luck!

 

i have and 87vfr700f2 do you have

* the tail section
right foot pegs
mirrors
windscreen
front upper fairing
left and right fairings
gas tank

 

the tail section is gone.

i have both right foot pegs ride and pillion.
I have mirrors they are in decent condition if you pay the shipping you can have them they work they are faded and have some cracking.
I have three windscreens
a. original it is hazy
b. a blue rifle windscreen (very tall)
c. a dark smoke Maier which I like
I have all those fairings they will need to be painted though
gas tank has a dent on the front it has been cleaned and coated with POR-15
and I used it for three years after that it is fine. I would replace the o-rings on the fuel cut off.
I'll send you all of this stuff and a box of screws and brake parts for $400 and I'll pay the shipping. or let me know what of it you want

 

do you have the left foot peg and bracket? mine has been broked and replaced by this:


and the silver colored bracket here: (I broke it)


and if you do have either of those....
do you have the clutch lever pushrod (to actuate the clutch) and the bushing that goes with it? would attach here:

 

YES i HAVE ALL OF THOSE PARTS

 

and your price, shipped, is?

 

Left & right rear Sets
left front Brake Bracket
clutch pushrod and bushing
all this can be yours for
$110.00 shipped
I checked with www.bikebandit.com.
These parts are available new although some of the parts for the rear sets are discontinued

[FONT=Arial, Helvetica, sans-serif]127222-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] PIN, STEP BAR JOINT [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 STEP [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$4.13[/FONT] [FONT=Arial, Helvetica, sans-serif]$4.13[/FONT] [FONT=Arial, Helvetica, sans-serif]$4.13[/FONT]

[FONT=Arial, Helvetica, sans-serif]127336-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] ARM, L. MAIN FOOTPEG [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 STEP [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$64.73[/FONT] [FONT=Arial, Helvetica, sans-serif]$64.73[/FONT] [FONT=Arial, Helvetica, sans-serif]$64.73[/FONT]

[FONT=Arial, Helvetica, sans-serif]127532-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] SPRING, L. [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 STEP [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$3.80[/FONT] [FONT=Arial, Helvetica, sans-serif]$3.80[/FONT] [FONT=Arial, Helvetica, sans-serif]$3.80[/FONT]

[FONT=Arial, Helvetica, sans-serif]127765-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] HOLDER, L. MAIN STEP [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 STEP [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$72.76[/FONT] [FONT=Arial, Helvetica, sans-serif]$72.76[/FONT] [FONT=Arial, Helvetica, sans-serif]$72.76[/FONT]

[FONT=Arial, Helvetica, sans-serif]232951-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] BOLT, SOCKET (8X28) [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 STEP [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$3.49[/FONT] [FONT=Arial, Helvetica, sans-serif]$3.49[/FONT] [FONT=Arial, Helvetica, sans-serif]$3.49[/FONT]

[FONT=Arial, Helvetica, sans-serif]59216-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] ROD, PUSH [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 CLUTCH MASTER CYLINDER [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$14.00[/FONT] [FONT=Arial, Helvetica, sans-serif]$14.00[/FONT] [FONT=Arial, Helvetica, sans-serif]$14.00[/FONT]

[FONT=Arial, Helvetica, sans-serif]59215-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] BUSH [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 CLUTCH MASTER CYLINDER [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$8.78[/FONT] [FONT=Arial, Helvetica, sans-serif]$8.78[/FONT] [FONT=Arial, Helvetica, sans-serif]$8.78[/FONT]

[FONT=Arial, Helvetica, sans-serif]137979-001[/FONT]​

[FONT=Arial, Helvetica, sans-serif] BRACKET, L. [/FONT] [FONT=Arial, Helvetica, sans-serif] 1986 Honda VFR700F2 INTERCEPTOR - F2 FRONT BRAKE - CALIPER [/FONT] ​

[FONT=Arial, Helvetica, sans-serif]$93.53[/FONT] [FONT=Arial, Helvetica, sans-serif]$93.53[/FONT] [FONT=Arial, Helvetica, sans-serif]$93.53[/FONT]

​

[FONT=Arial, Helvetica, sans-serif]Subtotal:[/FONT]​

[FONT=Arial, Helvetica, sans-serif]$265.22[/FONT]​

 

I'll let you know as soon as I get my christmas bonus! (should be first part of Dec).

If you still have all those parts, I'll take them off your hands for that price.

 

koorbloh,
sure no problemo, senor
I am in no hurry and I will hold them for you. It will give me time to remove them from the bike.

 

cool.

it's one of those things were I could afford it right now, but I know I'll get extra money at christmas, and the bike isn't moving until way after christmas.....

you know...

I'll talk to you then!

 

other parts I need:


228020-001

LEVER, PETCOCK
1987 Honda VFR700F2 INTERCEPTOR - F2 FUEL TANK
$13.18 $13.18 $13.18

55148-001

ADJUSTER, CHAIN
1987 Honda VFR700F2 INTERCEPTOR - F2 SWINGARM
$23.09 $23.09 $23.09

55140-001

PLATE
1987 Honda VFR700F2 INTERCEPTOR - F2 SWINGARM
$14.24 $14.24 $14.24

 

Danimal,

I have a 86 VFR700f, I am looking for mirrors, any idea where I might be able to find some, either original or does anyone make an aftermarket mirror for these, any help would be greatly appreciated. thank u

 

koorbloh Nice looking bike I'm still working on getting my 86 f2 on the road. your lucky, yours looks to be in better shape then mine was when got it lol. good luck to ya

 

Hey guys, I just bought a 86 700 F2, am making it road worthy again too. Just bought it late Dec. needs some pieces, odds and ends, anyone have a L side cover/plastic that goes just beneath the seat? the bike caught fire when the rectifier took a shit and melted that side piece of plastic. luckily it only damaged the seat a little bit, can be reupholstered. last guy who bought it had to deal with the electrical problem, he has a baby on the way and wont have time to finish the bike I bought it for 1300 and it runs and looks great. 18K mi. Need lots of fairing bolts,one front disc bolt could use a good used windscreen, horn. So far I have cleaned the bike, using no water at all, from head to toe, sprayed the motor and carbs with some WD40, (the motor was looking too dry). and made sure everything electrical works, all does x cept the horn and headlight. No B Deal. needs new gen maint. things brakes, chain F sprocket( Im gonna drop a tooth). Anyone got a parts bike with any of this left?