07 body clips

I'm looking to grab some spare plastic body clips. I'm currently missing the two at the bottom of the instrument panel. Hopefully, someone knows of an online source that has the correct size/type. Thanks, Chad

Sent from my SM-S916U using Tapatalk

 

Have you sourced the p/n from Honda and done a Google search?

 

https://www.ebay.com/itm/20X-For-Ho...p4429486.m46890.l6249&mkrid=711-127632-2357-0

90683-GAZ-003

Not sure if it's bad form to post an eBay link, but here it is. $3ish from Honda. If they are removed properly they can be reused until the plastic gets brittle

Sent from my SM-S911U using Tapatalk

 

I've searched to no sure part numbers.The bike is new to me this summer. From doing my oil change so far, it looks like two different clips are used for the black plastic front fairing piece. And a different size for the bottom of the instrument cluster.

Sent from my SM-S916U using Tapatalk

 

I did see these. I'll probably give these a try to have some spares available for the lower fairing, Thanks you.

Sent from my SM-S916U using Tapatalk

 

Sorry, but I don't understand. Any parts diagram for this model will have all parts listed. You can get the honda p/n and search for it on fleabay or Amazon to get what you want. E-Z. ServiceHonda is one of many places to get OEM p/ns.

 

Number 1?

Or do you have a pic of the missing clip? I only see the body clips and actual screws

Sent from my SM-S911U using Tapatalk

 

It's the two holes at the bottom of the Guage cluster facing the forks. It would attach to the two smaller fairing corner pieces for the left and right side. Just picked this up about a month ago, and they were missing. So I'm not sure the style that goes into them. But it's a fairly smaller hole than the ones removed from the lower fairing for oil changes.

Sent from my SM-S916U using Tapatalk

 

The pics aren't showing for some reason.

I'd have to look closer at mine, but I'm halfway across the US right now

I know for sure the black inner panels use the same GAZ p/n. And the rest of the painted fairing pieces use the pan screw with a thin plastic washer to mount.

https://www.partsfish.com/oemparts/a/hon/5053f628f870021c54be7ddb/upper-cowl
Sent from my SM-S911U using Tapatalk

 

It is one of these?

 

Thank you. I'm not sure why there are no photos. Last set I sent out in the smallest size, I'm able to.

Sent from my SM-S916U using Tapatalk

 

Bingo, from the looks of it, should be number 19.

Sent from my SM-S916U using Tapatalk

 

My uploads didn't work either

Sometimes they work, sometimes not. Probably a Tapatalk issue.

Hopefully you find the right clips. I can only remember seeing the panhead screws and the same body clips that go around the inner main fairings, the bottom of the fairings, and the inner black panels that face the forks.

But I havent taken the gauge cluster off yet

Sent from my SM-S911U using Tapatalk

 

Just emailed tapatalk service. Looks like number 19 in the parts diagram.

Sent from my SM-S916U using Tapatalk

 

Sweet. Please let us know if you order those eBay clips.. id like to know if they work.

I ordered some aftermarket clips similar for my Civic and they worked just fine for a fraction of what Honda wanted

Sent from my SM-S911U using Tapatalk

 

I ended up procrastinating on ordering the clips from eBay. Anyway, I did a coolant flush and needed some. A trip to the Honda dealership and 5 body clips and 29 dollars otd, lighter in my wallet. The Honda part number is 90116-spo-003. The key here is that they are 6mm in diameter for ordering elsewhere. Hopefully, this helps someone down the road.

Sent from my SM-S916U using Tapatalk