Strong Pulse in Front Brake ?????

Discussion in 'Mechanics Garage' started by dickman696, Sep 25, 2007.

  1. dickman696

    dickman696 New Member

    Joined:
    Sep 18, 2007
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    98 VFR800 25Kmiles, Brake pads look ok.

    I've got a strong pulse in the front brake, I can feel the whole lever
    pulsing. It's much worse when I'm coming to a complete stop.

    Where should I start with this? The bike was down hard on the left side
    by the previous owner but I didn't notice this problem on the pre-purchase.

    Is this definitely a warped/bent rotor or could this be as simple as a caliper
    cleaning?

    Any help would be appreciated!
     
    dickman696, Sep 25, 2007


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. mello dude

    mello dude Administrator

    Country:
    Romania
    Joined:
    Jan 3, 2006
    Messages:
    4,387
    Likes Received:
    445
    Trophy Points:
    113
    Location:
    Southwest Ohio
    Map
    Put the front wheel in the air and spin the wheel - look at the rotors to see if you can see it move back and forth. My first guess is a bent rotor. My bike had the same. Youll need to replace.

    MD
     
    mello dude, Sep 25, 2007


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. dickman696

    dickman696 New Member

    Joined:
    Sep 18, 2007
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    Ok, I just pulled the calipers off, the right side might have a really small warp...
    It's hard to tell.

    But guess what? I just got a flat rear tire from the ghetto alley where I'm
    living right now... So much for riding until I get that fixed!
     
    Last edited: Sep 25, 2007
    dickman696, Sep 25, 2007


    This site may contain affiliate links for which VFRworld may be compensated
    #3

Share This Page