Welcome to VFRworld.com! Log in or Sign up to interact with the community.

How often do you change your clutch fluid and what grade do you use.

Discussion in '6th Generation 2002-2013' started by 25thVFR800, May 30, 2017.

  1. 25thVFR800

    25thVFR800 New Member

    Country:
    Canada
    Joined:
    May 24, 2017
    Messages:
    42
    Likes Received:
    33
    Location:
    Toronto, Canada
    I've had my VFR for only a week so I'm getting up to speed.
    Clutch works great but is at lower limit line roughly
    Previous owner said he replaced it 3 years ago.
    It is clear and clean
    Am I able to just unscrew top of hydraulic clutch fluid reservoir and fill it up a tad or leave as is.
    What grade fluid do you use I do not see it in manual.
    Thanks
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. bitterpil

    bitterpil New Member

    Country:
    United States
    Joined:
    Mar 7, 2008
    Messages:
    1,379
    Likes Received:
    2
    Location:
    Northern Virginia
    You use Dot 4 brake fluid should be on the reservoir cap. I change mine every time I change my brake fluid. Leave it alone and or bleed it out an swap fluid. Cover your bike and all exposed painted parts around the reservoir when dealing with this stuff. The brake fluid makes a good paint remover. Towels, plastic wrap or both make a good barrier.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. carlgustav

    carlgustav New Member

    Joined:
    Jan 23, 2008
    Messages:
    373
    Likes Received:
    34
    Location:
    Heart of Dixie
    I use Dot 5 silicone fluid (only for the clutch), changed fluid immediately after I purchased my bike (new). Have had it in for 9 years, no issues. Use same for my track bikes. And did the same a long time ago for my '84 VF700, fluid has been in there for over 15 yrs. That said, I don't mind experimenting. Going with the manufacturers recommendation is generally best :biggrin: ...

    ACE
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3
  4. NorcalBoy

    NorcalBoy Member

    Joined:
    Aug 29, 2007
    Messages:
    6,194
    Likes Received:
    895
    Location:
    Desert Southwest
    Pil is correct. DOT4 is the factory recommended fluid for the clutch. If it has been three years, I would completely drain the entire system, clean out the res, flush with new fluid, and do a final bleed.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #4
  5. Aimbot9000

    Aimbot9000 New Member

    Country:
    United States
    Joined:
    Jun 19, 2013
    Messages:
    334
    Likes Received:
    13
    Location:
    Mount Holly,nc
    I flush my clutch and brake yearly but that's probably overkill
     


    This site may contain affiliate links for which VFRworld may be compensated
    #5
  6. ridervfr

    ridervfr Member

    Country:
    Belgium
    Joined:
    Dec 26, 2009
    Messages:
    4,048
    Likes Received:
    144
    Location:
    South FL
    Have a spray bottle with some H20 close by in case your less than perfect handling that stuff as it eats paint plastic parts. Not bad to mist the bike either, top secret stuff I dont mind sharing with other viffer riders :peace:
     


    This site may contain affiliate links for which VFRworld may be compensated
    #6
  7. NorcalBoy

    NorcalBoy Member

    Joined:
    Aug 29, 2007
    Messages:
    6,194
    Likes Received:
    895
    Location:
    Desert Southwest
    Not really, I think that is a smart interval.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #7
  8. clarkm8

    clarkm8 New Member

    Joined:
    Sep 22, 2014
    Messages:
    16
    Likes Received:
    1
    Another DOT4 user here. I do it every year as well. Besides, it is not too expensive.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #8
  9. rckrzy1

    rckrzy1 New Member

    Country:
    United States
    Joined:
    Apr 27, 2017
    Messages:
    43
    Likes Received:
    7
    I have a brake fluid tester, it measures moisture , cost about $10 on ebay, use it on all vehicles. So no doubts, it's what Tech inspectors use as well.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #9
  10. vdrive

    vdrive New Member

    Country:
    United States
    Joined:
    Apr 28, 2017
    Messages:
    45
    Likes Received:
    11
    Location:
    florida
    I replace clutch & brake fluid with dot 4 every few years or when the fluid in the window turns dark.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #10
Related Topics

Share This Page