Free-new fender eliminator

do you have any photos ?im looking at doing something similar to tidy up the rear of my 6th gen and would mind seeing som pics of what it looks like,thanks zzzaggg

 

Enjoy, hope this is useful

 

Finally got around to removing the fender on my '07. I appreciate the thread here, it really helped out. My only issue I have is with the two rear bolts under the seat that hold the license plate frame/light holder. The original bolts must be too long because I cannot get the license plate frame snug to the bike. I'm assuming that I just need two shorter bolts? The only other thing I can think of is to get 1/4 or so spacers to go between the license plate frame and the bike. Anyone else run into this issue?

Update: All it took was a few rubber grommets from the Home Depot to take up some space, then the license plate frame snugged up nice.

 

Hey, could I have the exact model details of those pipes? I have the exact same VFR and I would like to get those pipes. thanks in advance.

 

Just go on the eaceful:Leo Vince website and follow the prompts for your model. They have changed the style a bit since. These are 2008 model carbon fibre pipes (the best sound out)!!!!!!!

 

go to hardware store for shorter bolts or just get out the old HACKSAW. easy MATE !!!!!

 

go to hardware store for shorter bolts or just get out the old HACKSAW. easy MATE !!!!!

 

SORRY THIRD ATTEMPT to this problem------ go to hardware store for shorter bolts (neater) or just get out the old HACKSAW. easy MATE !!!!!

 

Thank you