Techlusion box wire tap question.

Quick question, you guys. I am sticking on the Techlusion box and they suggest I use the tail light hot line as a switched power source. They state that this wire is Brown/White that I need to splice into. I don't see it. Anybody out there done this recently and remember the wire tap color? Or another source? It's after hours and I can't reach them this weekend to ask them directly.

Thanks.

 

Please, you guys. Maybe just tell me what color wire you have used in the tail light for a switched accessory? I am kinda outta luck, as my wiring diagram is poor quality.

 

I am begging here......

 

Brown with white is correct. There should be 3 of them in the harness going to the back.

 

Yes, the green ones are grounds. I tapped into the taillight br/wh and it works fine. I extended all the fi wires so I could mount the box under the seat. On my first VTEC, I mounted it in the front fairing near the ECU but like the convenience of the underseat location.

 

Ok, thanks. I got it on and the change is noticeable. Did you guys do the pair valve block on this also? I had previously done that and it greatly helped the low end, but I got the techlusion for the 48-5k stumble. Do any of you guys recall your settings?

Thanks, it is great to have you out there.