Welcome to VFRworld.com! Log in or Sign up to interact with the community.

1986 VFR750 carb rebuild kit???

Discussion in 'Mechanics Garage' started by jutjutvfr, Aug 18, 2015.

  1. jutjutvfr

    jutjutvfr New Member

    Joined:
    Aug 18, 2015
    Messages:
    2
    Likes Received:
    0
    Location:
    Rhode Island
    Hello all,

    I have the carbs off my Interceptor and am having trouble finding a rebuild kit. There seem to be a lot of kits for other V45 bikes like Magnas and earlier/smaller VFRs but I can't seem to find a complete rebuild kit for the 1986 VFR750. Can anyone provide some insight on where I can find a compatible kit?

    Thanks all!!!
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. zoom-zoom

    zoom-zoom Member

    Country:
    Canada
    Joined:
    Aug 15, 2004
    Messages:
    1,446
    Likes Received:
    16
    Location:
    BC, Canada
    Not sure if he can help your not, but maybe send squirrelman a Private message. He is one of our local carb guru's and he might be s Le to either rebuild the carbs for you, or possibly give you an idea as to where to get a rebuild kit.

    http://vfrworld.com/forums/member.php/3024-squirrelman
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. Jeff_Barrett

    Jeff_Barrett Member

    Country:
    United States
    Joined:
    Feb 12, 2015
    Messages:
    3,545
    Likes Received:
    76
    Location:
    Winnipeg, MB
    Oh man, parts for those were hard to find 10 years ago when I did my '82 Magna. You'll have to scour the internet, maybe even use some used parts. I believe I found mine all on flea bay.

    The biggest thing here though, is to be incredibly careful with the diaphragms, I don't think you can get those anymore and if you damage them, them, you're up shit creek without a paddle.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3
  4. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    10,234
    Likes Received:
    896
    Location:
    Buffalo, NY
    The only commonly needed replacement parts you might want are the float bowl gasket and float needles, both available online but not in any VFR-specific repair kit.

    Bowl o-rings can be replaced with industrial items referenced elsewhere on our site, and float needles are Keihin K-1, widely available.

    It's rare that anything else would need replacement.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #4
  5. jutjutvfr

    jutjutvfr New Member

    Joined:
    Aug 18, 2015
    Messages:
    2
    Likes Received:
    0
    Location:
    Rhode Island
    Thanks Squirrelman!!! My biggest concern was the float bowl gaskets, I think everything else should be fine. I found a seller on ebay who has a partial kit with the gaskets, float needles, and float bowl screws/washers. Just wanted to double check before I shelled out $100. Much appreciated all!
     


    This site may contain affiliate links for which VFRworld may be compensated
    #5
  6. THRASHED

    THRASHED New Member

    Country:
    United States
    Joined:
    May 13, 2015
    Messages:
    135
    Likes Received:
    3
    Location:
    San Dimas, CA
    I just did a complete tear down/rebuild on my carbs. I ordered all my stuff OEM from Partzilla. Yes, probably a bit more money but I felt better about it. squirrelman is right (as he usually seems to be) about there not being a complete rebuild kit. I ended up ordering a gasket kit and used about 1/4 of them. Could have ordered individuals for what I needed.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #6
Related Topics

Share This Page