Delkevic 9" hi mount problem! Please HELP!!!!

I have been struggling with this thing for about 3 hours searching for answers and trying to figure out where and how the mounting bracket mounts! Am I overlooking some simple?! Does the mounting bracket require anything to be modified?

It is for a 94 vfr 750




This is the exact exhaust here.

http://www.delkevic.us/index.php?route=product/product&path=1566_2505_2554_2560&product_id=3214

Any help is appreciated

 

I take it no instructions manual came with your kit? Did you check Delkevic's website to see if they have one you can download?

I improvised my high mount install for my 5 Gen by making a "hanger" by using a piece of aluminum angle iron and bolted it to the rear sub frame right above the passenger peg. There was a bolt that holds a component of the wiring harness that I used. Looking at the link you posted, it looks like it should have come with a hanger.

 

No instruction manual and the mounting bracket given is a tad bit long so i am having trouble figuring out the intended use. It looks like the rear wheel well plastic is a problem no matter what part of the frame in that area i try to use. I even tried to use the rear peg mounting and it was going to crush my brake line so that was a no go. Also i noticed in their website pic it is just hanging no exhaust bracket. Haha! This is gonna take some engineering!

 

This is what I ended up with. I just notched the plastic where the hanger met the under cowl piece. The rear upper cowl doesn't touch it all, so I didn't have to worry about that. I bought this exhaust used and was originally a low mount but I traded the mid-pipe for a high mount version and made the hanger for it. The low mount used the stock exhaust mount on the rear passenger peg I assume.