rear break leaver adj???

Discussion in 'General VFR Discussions' started by tweber, Jun 28, 2007.

  1. tweber

    tweber New Member

    Joined:
    Jun 19, 2007
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    NC
    Hello All,
    New to Forum, great information on the VFR. My issue; Had my 95 for about 1 month love the bike, I've notice that my rear break leaver has a lot more travel than when i first started riding. I'm not slamming or over braking, the rear brake does grab but i have to press down more than before. Is there an adjustment that can be made or do I need new pads already? the fronts are working fine. Checked brake fluid all levels within spec.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. WhiteKnight

    WhiteKnight Well-Known Member

    Country:
    United States
    Joined:
    May 1, 2006
    Messages:
    2,299
    Likes Received:
    1
    Trophy Points:
    53
    Location:
    London, Ky
    Map
    check the fluid level in the rear resevior to make sure it isn't low, otherwise new pads would probably be a good investment. I put EBC pads on the rear of mine it takes a bit of getting used to cause the feel is a bit different, but they work great.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. tweber

    tweber New Member

    Joined:
    Jun 19, 2007
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    NC
    Hello Vinny,
    Thanks for the advice, I'll check the level as you suggest. Will let you know the results.

    Thanks,
    Thomas
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3

Share This Page