Carb gaskets and headaches

So i need new gaskets because i goofed when i cleaned the carbs ( everything else is fine, just these babies need replacing)
so i went here, http://www.hondapartshouse.com/oemparts/a/hon/50540a7df870021c54bed35c/carburetor-components , and am confused if i would need two or four of these sets so complete my set.

Does anyone have experience with this place or another way to get the gaskets? preferably short of going to my dealer- highway robbery

 

i have a note that says use an AS568-041, #041, viton oring, 3" x 3.125" x 0.0625", for the bowl gaskets.

 

can't say that helps much mate, but i did not specify that yes, its for the bowls. these are oem parts for an 86 vfr 700f, i just wanted to know how many of the kits i would need in case anyone knew.
but since you mention it, where could i check those out?

 

You would need 4 gasket sets, part number 1 in the microfiche that you linked, since there are 4 carburetors on the vfr 750.

Usually folks are just looking for the bowl gaskets for some reason, don't ask me how i already knew that, but that set looks like it should include all of the gaskets for one carb.

For the bowls you might try this: VFR Bowl Gaskets

 

hate to break it to ya, but my bowls are a funky rectangle, not an O. but you should know that considering you have one of these.