Two Bros Exhaust Full Dual System

After reading all of this, I do get a certain satisfaction from watching the exhaust exit from both cans of my Leo Vince EvoII system upon start up. :banplease:

 

Ok I bought the two bros V.A.L.E slipons...Well one slip on one real can thats not attached. I go to install and realize issing the x ring that connects the can to the pipe. The other can has one but It cannot be reoved do to the bracket thats welded on to the pipe,and thats to ake it look like its attached to something. Anyway I called the to see if I could somehow get replacement or at least buy one. The guy on the other end of the phone kept askin dumb questions. I like dude (standered southern cali language) its not there either it fell out the box or I didnt recieve it. He said he'd call me back but never did.Now Im stuck cuz I already took the stock exaust off and I broke the bolt on the clamp. I eneded up cutting the bracket off the fake pipe just to get the x ring from it and the non usable can I just rigged it up to make it secure. Thats why..Should ve bought microns.

 

Well guys here is the official (as much as we can trust this source from Two Brothers) reply from them on the M2 VAle True Dual proposed system... it looks for those of us looking for a True Dual system from them are SOL.

----- Original Message -----
From:
To:
Sent: Wed
Subject: Fwd: RE: Data posted to form 1 of http://www.twobros.com/Cust_Service/contact/contact.html

Tom-

As far as the VFR system we offer, it will continue to be a single system. We are not planning on offering a true dual system.

Jose Perez Customer Service Rep. jperez@twobros.com 1.800.211.2767 Ext. 104 www.twobros.com



[1] -----Original Message----- From: twobros@twobros.com [twobros@twobros.com [2]] Sent: Friday, December 28, 2007 5:36 PM To: [3] Subject: Data posted to form 1 of http://www.twobros.com/Cust_Service/contact/contact.html *************************************************************************** **** name: Tom subject: My Two Brothers M2 VALE System Date: Friday, December 28, 2007 Time: 19:36:11 comments: Hello, I have a M2 VALE System on my 2005 Honda VFR800 ABS and I've heard that you are going to offer a "True Dual" system now for my bike. My question is will you have an upgrade capability for us owners who have the current system? Obviously all I would need is the piping and now the canisters since I already have two good ones. My system is only 2 months old. So can we buy the piping alone? Thanks for your time.

 

I don't intend on intentionally pissing on anyones cornflakes here, but my read on the entire VFR upgrade market is this, aside from the Power Commander, there isn't a whole lot of quality, aftermarket, stuff manufactured for the VFR by companies in the United States. It would seem the best aftermarket products for the VFR come from everywhere but the US. Shop abroad and you'll be a lot happier - just my .02

 

Got any sources for good non-us products you would like to share?

 

I have absolutely no problem offering up the name of a person who frequents this forum and goes by the moniker of KIA001. I purchased a Leo Vince EvoII carbon can slip on system from this member a few weeks ago. Karl is not only helpful, but knowledgable as well. I got a good deal on a system from Karl. His website is www.rg500.com. Try him or, If you want to look around try Pipe City in Arizona. Their web address is http://www.pipecity.com/index.cfm/. These folks should be able to hook you up with what you seem to be searching for - a fully functioning, slip on, dual can exhaust. Post again if you would like any further assistance. I have compiled quite the list of suppliers for all parts associated with the 6th gen VFR. I have links to just about evrything you could possibly want - from Powerlet kits to frame sliders. I hope this helps you folks. Peace :hippie:

 

Well TB is consistant, I'll give them that!

When you buy a product from them, they are great! But if you need assistance or a part is missing they are complete pukes!uke:

Is a part that costs 1.50 really worth pissing someone off that much?

BZ

 

I had zero issues with them when I found some issues with mine.
I purchased the Black Edition dual system off an e-bay seller, and one of the magnesium end caps was damaged. I took pics of the damage and installed it on my bike anyhow. I then contacted them, and they replaced the end cap, without requiring me to send the old one back, so now I have a 3rd end cap just in case I need it. Later, I noticed on their website that the black edition cans were supposed to come with anodized black bolts to hold the end caps in. Mine came with the stainless steel. I called 2bros up again, and within a week, I had a set of the black anodized bolts. I ended up going back to the stainless, since the metal is harder to strip using those damn torx screws. I ended up ruining half of the anodized black bolts just trying to get them in place.