FI light stays on with no codes?

Hey guys hope someone else has come across this. FI lite stays on, bike will start and run poorly for a minute or two, then die. Tried to read codes but nothing shows the FI lite just stays on. Charging system is working correctly output voltage is 14V + .
Any Ideas?
Thanks
Bill

 

Is your side stand down?
The FI light will only blink codes when side stand is down, and rpm is below 5000, otherwise it will only stay on.

 

Check the battery. Mine would start and run a few minutes, the FI light would come on and it would stall. I checked the RR wires and they looked good. Put in a new battery and all is well. Doesn't make sense that it would start with a bad battery but it did.

 

So here's the lates update: bike seems to run ok, the FI lite stays on but when you turn on the turn signals the engine shuts on/off with the blinkers? Any ideas?
Side stand is down and have checked battery


Sent from my iPhone using Tapatalk

 

TinkerinWstuff good call, mine wasn't burned up or melted at all but when I moved the plug around the light went off (FI) and every things seems to have gone back to normal. So that being said what would any of you recommend as a permeant fix. ?
Thanks again
Bill