no power when I turn ignition

hello fellow riders I have a problem with the 98 Honda VFR 800 just checked out my wires and harnesses and noticed a splice on the red wire to the ignition switch it touched the frame then sparked and now I have no power at all fuses okay any advice would be helpful thank you guys n gals

 

Have you checked the main fuse in the green connector to the front of the battery. It is a 30 amp fuse and may have been blown when the wire shorted.

 

yes I did check the fues im assuming the ignition switch burnt out. thanks for the response.

 

I have had the same thing happen to me. It was an attempted theft and now I have no power and all the fuses are fine. So was it the Ignition switch?

 

start measuring voltage at the battery, post back what you have

 

you should have two 30 amp fuses and a 20 amp fuse to check first by the batterry

 

I found the 2 30 amp fuses and checked the voltage is at 12.3. Where is the 20 am fuse located?

 

The wiring diagram says between main fuse b(30a) and engine stop relay

 

I found all the fuses and the 30 amp I thought I checked was popped. Thanks for the help. I soldered the ignition back up and she started. I got to ride for the first time in 4 weeks. B-) Thanks!

 

Good to hear