3rd gen Part out

Hi, sorry if it does't belong here (if moderator prefer, i can transfer to the classified...)
Well, vfr are getting rare... and i miss time to fix, and mod the one i had. Unfortunatly... i bought a cbr900rr, the easy way for me.

So i have my vfr750f 1991 for part out. (engine/rear swing arm and wheel/complete harness with ecu/ tail fairing) ---> sold localy and here on vfrworld.

i do have an offer for two fairing part (mid left and upper right)

here just a couple of pics
i do have some misc other part and bolts...
and a red transparent windscreen.


up for grab:
-both mirror
-tank
-headlight
-front wheel/tire
-front forks
-controls
-pegs
-front spoiler
-seat
and some others...
waiting on buyer:
-right and left clip on

what is not for sale anymore

-cluster in kph-frame
-left upper fairing
-left mid fairing
-left lower fairing
-right upper fairing
-right mid fairing
-right lower fairing
-solo seat
-engine
-rear swing arm
-rear wheel
-complete harness with ecu
-tail fairing


























I have an ebay account (labatt2k)
i have vouche on other forum (mostly honda car... like d-series.org under labatt2k, honda-tech.com under labatt50, forum.clubcivicquebec.com under labatt50)
i'm paypal verified. Note that i live in Canada!! Canuckland...

 

Hey Labatt! I knew you were a Canuck cause of your name, good beer too ; )
Are the clip-ons straight? How much for the right hand bar? No controls nothing, just dah clip-on.

Kinda makes my eyes all weepy and shit, looking at the poor gen 3 bikie in dimantle like that.

 

i know!! that was such a nice bike, for me the 3rd/4th gen were the best vfr! i was really hoping to do something with that bike (i rode it 2 year before switching for a cbr900rr).

I'm the dude with nice project, i did have 3 homemade turbo car before... i built an all motor setup, then a 250hp 1.5liter... but now i went back to school in mechanical engineering. So, i went the easy way... bought a 10'000miles old cbr900rr.

But for the whole right clip-on with control, 30$ shipped... good?

 

Hey, turbos are interesting. I have personally seen turbo Hayabusas put out over 300 hp on the dyno, dedicated drag race machines that you could actually ride to the corner store to get a quart of milk.

I only need the clip on, no controls nothing. Its straight right? My gen 3 bike gets less action than it did a few years ago. As the years go on, she improves with age if you can believe that. Slowly old parts get replaced with new. I take it out at least once a week, and this week-end I am planning a trip with dah wife out to the everglades which should be over 200 miles. CBR900 is a great bike to work on!

Let me know how much for the bar, up late tonight :smile: any-whooooo...We do have the riding weather here.

 

ok, i'm off work tomorrow, i'll get a pics of the right clip on only

 

If it falls through id take both clip ons,
And is pic 5 a rear seat cowl? Id like that

 

updated first post, pm replied

 

Received the speedo today, looks great thanks!!

 

PM sent. 12345678910

 

Are the foot pegs still available? I'd be interested in those.

 

yes they are, do you need all four? front and rear?

 

Right now I only need the left rear. Do they come with the mounting hardware?

However, I have acquired another frame and engine and do have plans on building it so I could use the complete set.

How much are you asking for just the left rear? How much for the complete set? This will determine if I can get the set now or have to wait.

 

yes i do have the mounting hardware.

For the rear left one maybe 15$ plus shipping or the whole set 60$ shipped

 

I can do the whole set. I'll send you a PM.

 

How much for the forks and/or the tank? Shipping to 45150 Milford, OH, USA.

 

Did Nitrousva by just speedo or the whole set? I have a need for temperature gauge only.

 

Hi,

do you have the exhaust? Complete? How much shipped to 18072?

Thanks,
Dave