Need help does anyone have lowering link for 94 vfr

I am a little short and need to lower the rear of my 94 vfr. Has anyone done this? Can anyone tell me if they even make a lowering link for this bike.

 

mate
i have a 94vfr750r that i have been drag racing here in australia at our country track. i lowered the rear 75mm (3") by cutting the lower link and adding 15mm (5/8") to the length. i am a welder so it wasnt too hard. (not recommended for road use) might i suggest if you look at removing the bottom linkage, (it is a tube with a bush inside and two plates that connect to the swingarm) take it to a engineering shop and see if they can duplicate it only 10-12mm longer. you will need to remove the exhaust system from the engine pipes back to access the long bolts that connect the linkage . hope this helps.

lmiller2

 

Thanks for your reply

 

Get a stock link from a VFR800.