Looking for a little help

As this is my first posting, I hope I don't overstep any protocols. Some of you may know me from CBX World and I'm happy to have found this site.

I'm in the process of building a CBX Streetfighter and I'm using the '96 VFR750F rear swingarm. Since I bought the pieces individually, I'm not certain of the proper assembly of the lower shock link system. I've been searching all over the web but unable to find what I need.

All I need is a close-up photo for that area from one of these bikes so I can see the proper angles and attachments to the frame. If you are able to do this for me, please send the photo(s) to:

jrluksik[at]wowway[dot]com

I would be very appreciative.

Thank-you,

J.R.
CBX-tras LLC

 

Ronayers.com Fiche Desktop Motorcycle Honda 1996 VFR750F REAR SHOCK ABSORBER 94-97

 

Dunno if either of these pics will be helpful to you CBX-tras but here are a couple parts breakdown pics of the '96 VFR750 rear shock and swingarm assembly. Good Luck with your build.

 

copycat. at least i was lazy enough to just link him....

 

Nah,no copycatting Meat. I posted pretty much the same time you did,you were just a bit quicker on the draw.:doh:

 

I already have those parts blow-ups from Honda. What they don't show is how the lower link is attached to the frame and the angles on the attachment plates.
That's where a photo of this area on a bike would really help me so I don't get in a bind later.
Everthing else I have figured out.

Thanks,
J.R.

 

just givin ya a hard time stosh... thought it was funny that we posted the same thing at nearly identical times.

 

the angled plates have an arrow on them point them forward

 

All of my parts look like the images above. Although the components in the link look different (no arrows on mine) I believe it provides me enough detail to fab the mounting.

It would appear as the "teeter-totter" has the dog-bone link just aft of center.

Thanks for the help.

J.R.