Help!starter relay wire mix-up

Well I had to replace the wire connectors on the starter relay and I have got them mixed up, what I need is someone to take a pic and upload it on here for me , I have tried to do it by lookIng at the manual but the diagram isn't clear enough for me so this has caused me many problems by having the wires mixed up , please someone help a fellow viffer lover , 96 VFR starter relay switch pic needed

 

Hold on.....looking.

 

Does that work?

 

Close not exactly the same as mine though mine has a fuse beetween the two terminals and the colored wires , if anyone else has a pic that's closer to the 96 then that should work but thanks I Appreciate it

 

Probe it if you have an ohmeter. The red wires go to the terminals on the relay that have continuity to the fuse. Whatever big cable terminal has continuity to the fuse goes directly to the battery. The other big terminal goes to the starter. The other wires (yellow/red from starter button and green/red from neutral switch) go to the two small terminals that are left...either way works.

 

do not have a meter

as far as as having a ohmeter I do not have one , and never used one , I need to get one and learn but i figured the best way for the time being is to just have someone take a pic , to hold me over untill my ass gets a meter and learns ho wto use it thats gonna be a project for another day seeing as i am electric illiterate

 

Do you have a pic of yours?

 

no i dont have a digital camera right now my old one broke

 

Is this it?
http://www.stuff4bikes.co.uk/ekmps/...-dc-y-dc-1-4-00-01-02-03-04-shadow-2642-p.jpg

 

You really really ,really have to have an DC volt/ohmmeter. A MUST HAVE.
And a WORKSHOP MANUAL, A MUST HAVE.

You cannot see electrons , you can only measure them.
M=Motor starter
B= battery

 

That's it now I need to know which wirees go where color wise thanks though