Will 1991 fm vfr exhaust fit 1993 fp vfr exhaust ???

Hi, have just purchased a full stainless steel exhaust system (excluding can) from a 1991 FM VFR 750 for £133. Not to sure of the make but as my original is full of holes and in a poor state hoping this will fit.
My bike - 1993 FP VFR 750
Does anyone know if ill have problems fitting this. I have read about the center stand my have to come off??
I have included a pic of the st/steel exhaust to give you an idea.
Ideas and advise very welcome.
Thanx
Neil
(vfr1976)

 

90-93 are basically the same bike so it should fit.

and i dont think you pics are working

 

To my knowledgeI gotta agree. I wouldnt expect it to give you any problems installing other than the typical "FUN" that is V4 pipes.

 

Thanks for your replies. I will post some pictures and info when I come to fit the new exhaust.
Another question for you guy's .......
From the picture I have added, is the exhaust a left exit or right exit set up ??? looks to me it's a right exit.

 

"Standard" 1990-1997 exhaust is a right-hand exit, not sure about other years.

 

Congratulations, you got the Motad replacement exhaust for the 3rd gen. Yes, it will fit.

Larry

 

Thanx Larry,

I have heard of Motad exhausts but don't know much about them. Are they good quality?? Can you tell from the picture if it's a right or left exit system??
Hopefuly my staintune end can will fit ok, I will find out in a day or so when It's deliverd !!

Cheers again

Neil

 

Hi Neil -

Let us know how the centerstand makes out with the Motad.

Some PO put together a Frankenstein exhaust under my bike, in bad need of replacement. I just bought a centerstand from David Silver, hoping I can make it fit without going to an OEM-replica set like Delkevic. I hear Delkevic is fine quality, but I'd sure like a Motad or TBR exhaust if I can fit the centerstand.

 

Hi deanc,
when I come to fit the exhaust I'll post some pictures of the fitting etc, I'll
know then what will happen with the c-stand.
One good thing about VFR's are there seems to be plenty of second hand
& new parts. Not bad for a 17 year old motorbike !!!!

 

1. Its right standard low exit.

2. Any 3rd gen slip-on will fit it.

3. Quality is acceptable, could be polished up some.

4. Design is shite, but works.

SHOULD fit with center stand.

Larry

 

Exhaust delivered today, spent 1 hour shot blasting the parts. Came up realy good. Just have to fit it now !!!!!

 

Don't forget new gaskets all around!

Larry

 

Hi Larry, Yep won't forget cheers!!!
Do you know what I should use to seal the down pipes to the collector pipes??
Also I have seen that You can buy copper gaskets and aluminum gaskets, what would you recommend ??