SpeedCell Mod... loose the weight not the juice...

Mr.RC45 lost 6 pounds 10 ounces with a SpeedCell battery...

SpeedCells are made using A123 cells. The constructions process is
proprietary & these packs do not require balancing. The packs are
built for motorcycle applications with cylindrical cells due to there
robust construction & discharge properties. Each PACK is made to a DoD
standard, capable of withstanding 100G load, operating temperatures of
-50*C to 49*C (-58*F to 120*F). It is important to understand that
these packs are NOT RC hobby type packs & their internal construction
as well as cell grade reflects this. Each cell is individually tested
before it makes it to the construction phase. These packs are not
Lithium ION construction. Speedcell uses Lithium Ferrous cells that
are not volatile or unstable. They will not rupture when puncture nor
produce an energy chain.

SUPERBIKE SpeedCell Specs:

- Pulse discharge @ 10 seconds = 240 Amps
- Continuous discharge (MAX) = 140 Amps
- Cycle Life (DoD spec) = 1,000 cycles

- Dimensions = 10.5cm (L) x 5cm (W) / 4.13" (L) x 1.96" (W)
- Weight = 766.57g / 1.69lbs
- Rating = 4.6Ah
- Applications = Two cylinder engines 600 cc to 1000cc or 4 cylinder 750-1200cc with stock stators as
well as Triumph 675 and some singles.

SpeedCell Supplier...
Motowheels - Quality Motorcyle Parts and Products

Speed Cell size and weight comparison...


Speed Cell RC45 installation

 

So the stock battery is 9 lbs :O

 

Stock battery was 7lbs which shows up as a minus in Mr.RC45's new weight and balance figures...
407lbs dry with 52% front 48% rear weight bias...